NEWS

NEWS

STBD

Company News

Industry News

Picture Name

2024-05-23 10:07

Installation and use

Determine the distance between the prime mover and the load according to the connection form of the shaft and the length of the torque transducer. Adjust the distance between

View Details
Picture Name

2024-05-23 10:07

Installation and use

Determine the distance between the prime mover and the load according to the connection form of the shaft and the length of the torque transducer. Adjust the distance between

Picture Name

2024-05-23 10:07

Commonly used dynamic torque transducers come in the following forms

First is the inductive torque sensor: this type of sensor is mainly used in a non-contact measurement method, this torque sensor has a longer life, high reliability, and is not easy to be subjected to

Picture Name

2024-05-23 10:06

Product Features

Measurement of torque: The strain gauge technology is used to form a strain bridge on the elastic shaft, and the electrical signal of the elastic shaft subjected to torsion can be measured by

Picture Name

2024-05-23 10:06

Dynamic Torque Transducers

A precision measuring instrument for measuring various torques, rotational speeds and mechanical power.

Picture Name

2024-05-23 10:06

Installation Requirements

The power equipment, transducer and load equipment should be installed on a solid foundation to avoid excessive vibration, otherwise data instability may occur, reducing the measurement accuracy or even damaging the transducer.

Picture Name

2024-05-23 10:05

Installation and use

the use of the environment: torque sensor should be installed in the ambient temperature of 0 ℃ ~ 60 ℃, relative humidity of less than 90%, no flammable, explosive products in the environment. Should not be installed in a strong electromagnetic interference environment.

Picture Name

2024-05-23 10:05

Tightening machines, electric wrenches, motor output torque

Torque sensor is a precision measuring instrument to measure various torque, speed and mechanical power. The scope of application is very wide, mainly used

Picture Name

2024-05-23 10:05

Signal output can be selected in any waveform - square wave or pulse wave.

Measurement of torque: The strain gauge technology is used to form a strain bridge on the elastic shaft, and the electrical signal of the elastic shaft subjected to torque can be measured by

Picture Name

2024-05-23 10:01

Principle and Application of S6010 Load Cells

Load cell is used to convert the weight signal or pressure signal into electrical signal conversion device. Load cell using a metal resistance strain gauge to form a measurement bridge, the use of metal resistance wire in the tension under the action of elongation and thinning, the principle of increased resistance, that is, the metal resistance with the strain and the effect of change and made (strain, that is, the size of the change).