-
About Us
-
-
-
NEWS
STBD
11
2023
-
02
Signal output can be selected in any waveform - square wave or pulse wave.
Author:
Measurement of torque: The strain gauge technology is used to form a strain bridge on the elastic shaft, and the electrical signal of the elastic shaft subjected to torque can be measured by
Measurement of torque: The strain gauge technology is used to form a strain bridge on the elastic shaft, and the electrical signal of the elastic shaft subjected to torque can be measured by providing power to the strain bridge. The strain signal is amplified and converted into a frequency signal that is proportional to the torsional strain after pressure/frequency conversion.
Product features
1. Signal output can be arbitrarily selected waveform - square wave or pulse wave.
2. High detection accuracy, good stability and strong anti-interference.
3. Continuous measurement of positive and negative torque without repeated zero adjustment.
4. It can measure static torque and dynamic torque.
5. Small size, heavy sensor can be detached from the secondary instrumentation for independent use, as long as the socket pin number to provide +15V, -15V (200mA) power supply, you can output impedance and torque proportional to the frequency of square wave or pulse wave signal. Lightweight and easy to install.
6. Measuring range: 0-10000Nm standard optional, non-standard 20,000Nm, 30,000Nm, 50,000Nm, 80,000Nm, 100,000Nm, 150,000Nm, 200,000Nm, 500,000Nm, 1,000,000Nm, 2,000,000Nm can be customized, customized for special ranges.
Specializing in mechanical sensing technology research and development, production, sales and after-sales as one of the enterprises. The company has many years of professional and technical team
Sentong Bada Technology
Service Hotline:
Production base:
1003, Building C05, Venture Headquarters Base, North of Fuyuan Road, Wuqing Development Zone, Tianjin
Copyright©2023 Sentong Bada Technology